SPL25-MR Schneeberger Lubrication Plate to suit MRW25 Linear Carriages
An SPL lubrication plate is used in applications where long lubrication intervals are required. It has an integral oil reservoir which provides automatic and uniform supply of lubrication over an extended period. It is best used in dry and clean environments such as handling technology or on ancillary axes of machine tools. The advantages of using an SPL lubrication plate include and assured supply of lubrication in any installation position, long lubrication intervals of up to 5000km or 12 months, refill apertures closed with screws, reduced cost of lubrication and accessories, low environmental impact due to minimum consumption of lubricant and wipers have a longer service life as oil is also supplied to the top surface of the rail. To achieve maximum travel distances without re-lubrication, the lubrication plates are always used in pairs and the carriages are given an additional filling of grease. They have the same dimensions as the carriage front plates and are installed in front of them. Retrofitting is possible. Additional ZCV wipers must be provided in applications in which particles of dirt can come into contact with the guideways.
- Assured supply of lubrication in any installation position
- Long lubrication intervals of up to 5000km or 12 months according to use
- Refill apertures closed with screws
- Reduced outlay on lubrication and accessories
- Low environmental impact thanks to minimum consumption of lubricant
- Wipers have long service life as oil is also supplied to the top surface of the rail
- The lubrication plates have the same dimensions as the carriages front plates
- Used in dry and clean environments
